Skip to main content

Take Your Shiner For a Stroll

Slow-trolling shiners targets the lunkers.

By Chris Christian

Originally published in the January 2008 print edition.

Shiner trolling—low tech, effective big bass tactic.

It's not the most glamorous bass tactic, and you're not likely to see it on the cable TV fishing shows. But there's a reason why slow-trolling live shiners is the bread and butter technique for bass guides from Lake Okeechobee to Talquin--it works. It gives virtually any angler their best shot to catch a true 10-pound-plus trophy. Or, at the very least, it helps to locate concentrations of bass that can be caught with other methods.

Slow-trolling a shiner is also about as simple a technique as you'll find. It's nothing more than tossing a live one 50 feet or so behind the boat, and then easing the boat along on the trolling motor while you let the shiner “swim.” In that respect it's not much different than slow-trolling a live bait for kingfish.

There are a few refinements that make it more effective. First, the shiner needs to be placed far enough behind the boat that a bass can move out of the boat's way and then slip back to where it was lurking before the shiner gets there. That's normally at a distance of about 50 to 60 feet. That's a lot of line out, and a bass will take more as it moves with the bait.

Therefore a long rod is an asset. Few guides use models shorter than seven feet. Seven- to 8-foot models are popular and a flipping rod is actually ideal. It has the length and the backbone required to troll the shiner and fight a good bass at these distances.

Braided line is another advantage. It has no stretch and slams a hook home even at a distance. Lines in the 40- to 60-pound-test range are the most popular, although monofilament lines in the 20- to 30-pound range will work.

This rig is best assembled around a casting reel. The reel needs to be left in free spool so it will yield line to a striking fish, yet have enough tension on the spool to prevent the shiner from taking line. There are some spinning reels with a “bait runner” type feature that will work, but a casting reel with a clicker button is a better bet. A casting reel without that feature will be effective if the spool tension knob is tightened down to the appropriate setting.

Once properly equipped, here are four pointers for best success.

1. Hook the shiner (5- to 7-inch wild shiners are the best bet) upward through the bottom of the jaw and out one nostril hole. Use a 5/0 wire weedguard hook (like the Eagle Claw) if vegetation is present. In open water use a 5/0 shortshank bait holder hook without the weedguard.

2. In depths less than 8 feet, add a small float 6 feet above the shiner. This will keep the shiner up and make it track straight. In deeper water delete the float and add a 1/8-ounce sinker 2 feet above the bait to get it down.

3. Set the trolling motor speed slow enough that the shiner can “swim” behind the boat and not just be “dragged.”

4. On the strike, stop the boat and let the bass swim 10 to 15 feet with the bait. Then, point the rodtip to where the line enters the water, reel down fast, and when you feel the weight of the fish, set the hook. You'll have a lot of line out, and this will sweep the slack out quickly. Don't be tentative. Go for it! If you get into a “feeling contest” with the bass, you'll lose.

This technique works anywhere there are bass. But, there are three situations where it, well, shines brightest.

Try it during the spawning season on any lake that has manmade canal systems. Bass spawn in these, and the big females hold deep in the middle of the canals when they are not actually on their beds. Troll right down the middle.

Use it along the outside edge of weedlines or the edge of submerged creek channels. Fish a float bait tight to the weedline, and if it is a deep weedline, put a second bait outside of that sans float and with a weight.

The technique works like a charm over any deep weed-covered flat (like those found on Rodman and other lakes). You'll be amazed at how many fish are out there roaming around in mid-lake, far from any bassy-looking shoreline.

It may lack some of the appeal of tossing a topwater at the bulrushes, but when obvious casting targets are lacking, slow-trolling shiners will find the bass, including some of the biggest fish you're likely ever to hook with any tactic.

GET THE NEWSLETTER Join the List and Never Miss a Thing.

Recommended Articles

Recent Videos

FS Boating Editor George LaBonte joins Scott Dunik and his son Shawn Dunnuck aboard their custom-built 20' center console.
Videos

Kaku Zulu

FS Boating Editor George LaBonte joins Scott Dunik and his son Shawn Dunnuck aboard their custom-built 20' center console.
Videos

Kayak Hulls

FS Boating Editor George LaBonte joins Scott Dunik and his son Shawn Dunnuck aboard their custom-built 20' center console.
Videos

Kayaks and Saltwater Flats

FS Boating Editor George LaBonte joins Scott Dunik and his son Shawn Dunnuck aboard their custom-built 20' center console.
Videos

Kayak Fishing Fun 2023 Product Showcase

FS Boating Editor George LaBonte joins Scott Dunik and his son Shawn Dunnuck aboard their custom-built 20' center console.
Store

Refurbished 1987 Alumacraft Jon Boat | One Man's Dreamboat

FS Boating Editor George LaBonte joins Scott Dunik and his son Shawn Dunnuck aboard their custom-built 20' center console.
Learn

New Berkley Finisher: The All-Around Live Sonar Lure

FS Boating Editor George LaBonte joins Scott Dunik and his son Shawn Dunnuck aboard their custom-built 20' center console.
Gear

New Berkley Power Switch: Powerhouse Lure Designed for Foward-Facing Sonar

FS Boating Editor George LaBonte joins Scott Dunik and his son Shawn Dunnuck aboard their custom-built 20' center console.
Gear

New Berkley Krej: A Reversed Lip Jerkbait?

FS Boating Editor George LaBonte joins Scott Dunik and his son Shawn Dunnuck aboard their custom-built 20' center console.
Learn

How to Install New Fuel Tanks in an Old Boat

FS Boating Editor George LaBonte joins Scott Dunik and his son Shawn Dunnuck aboard their custom-built 20' center console.
Videos

Testing Out the Latest from Old Town in the Marquesas

FS Boating Editor George LaBonte joins Scott Dunik and his son Shawn Dunnuck aboard their custom-built 20' center console.
Store

How to Powder Coat: Benefits of Powder Coating Metal Fuel Tanks

FS Boating Editor George LaBonte joins Scott Dunik and his son Shawn Dunnuck aboard their custom-built 20' center console.
Gear

Father & Son Customize a 20' Center Console | One Man's Dreamboat

Florida Sportsman Magazine Covers Print and Tablet Versions

GET THE MAGAZINE Subscribe & Save

Digital Now Included!

SUBSCRIBE NOW

Give a Gift   |   Subscriber Services

Preview This Month's Issue

Buy Digital Single Issues

Magazine App Logo

Don't miss an issue.
Buy single digital issue for your phone or tablet.

Buy Single Digital Issue on the Florida Sportsman App

Other Magazines

See All Other Magazines

Special Interest Magazines

See All Special Interest Magazines

GET THE NEWSLETTER Join the List and Never Miss a Thing.

Get the top Florida Sportsman stories delivered right to your inbox.

Phone Icon

Get Digital Access.

All Florida Sportsman subscribers now have digital access to their magazine content. This means you have the option to read your magazine on most popular phones and tablets.

To get started, click the link below to visit mymagnow.com and learn how to access your digital magazine.

Get Digital Access

Not a Subscriber?
Subscribe Now

Enjoying What You're Reading?

Get a Full Year
of Guns & Ammo
& Digital Access.

Offer only for new subscribers.

Subscribe Now