DriSuit Endurance

DriSuit endurance iPhone waterproof protective cases claim to be the FIRST completely sealed cover that allows both in and out of water use in any kind of weather.

The driSuit endurance case is built for all different types of environments. Each case has been factory tested at water pressures that well exceed international standards (however, periodic water resistance tests, without your phone inserted, are recommended). Features abound on this hand-size protective case. Expect to pay about $59.95.

Detailed Features

Opening and Closing: In order to OPEN your case, you must 1) rotate the two lower latches outward and then 2) swing the latch arms outward. You can now remove the bottom case component and remove your phone. The easiest method to CLOSE your case: Keep the latches in the “up” position, rotate each of the latch arms until the latches partially engage. Next you can flip the latches so they snap into their closed position against the case bottom body.

Fluidic Touchscreen: It may take a minute or two to get used to the touch/response as you will have to press a bit harder to actuate your phone's touchscreen. This is normal. Your case's proprietary fluidic touchscreen allows you to use your phone's touchscreen while in and underwater with full functionality.

PROTECTION: The double membranes combined with the inert internal fluid will add impact resistance to your phone's touchscreen.

SCRATCH-RESISTANCE: Both the inner and outer membranes are extremely difficult to scratch. Even materials like metals and stone pose little threat to scratching your screen, even with prolonged contact.

LEARNING TIME: Each time you immerse your case into the water, the phone's touchscreen may take as much as 20seconds to electronically acclimate to the water. This is normal. After this learning time, the fluidic touchscreen will function normally underwater until you remove it from the water.

Drop Resistance and Internal Cushioning: Do not be fooled by the hard plastic exterior shell of your case. Much of the inside of your case is lined with soft plastic in order to reduce the impact forces to your phone if dropped on a hard surface.

Maintenance: Keep Mating Surfaces and the Headphone Receptacle Clean. The top and bottom case components are designed to mate for a watertight seal.

DriSuit endurance technologies include:

•Proprietary Integrated Audio Jack allows full audio function for headphones, while maintaining normal audio and speaker phone operations.

• Fluidic touchscreen full touchscreen capabilities underwater and in

any weather.

• Easy-to-use Dual Latch ensures a solid seal

• Internally cushioned for shock protection

• Waterproof tested to 5 meters

• Space to hold one credit card

• Lanyard for carrying ease